Audio Mixing Consoles: Defining Auxes, Groups, VCAs, Matrixes
Take a closer look at how each of these four systems work as a part of audio mixing consoles.
Photos & Slideshow
Audio Mixing Consoles NewsNew Yamaha RIVAGE PM7 Offers PM10 User Experience Audio Mixing Consoles: With Many Choices, Cadac, Waves Models Could Be A Fit Best Performing 2017 Worship Tech Director Pieces Worth Second Look, Part 2 Lawo Launches Online Academy for mc² Console Trainings
Audio Mixing Consoles ResourceFinding Your Next Audio Mixing Console: Keep Your Budget In Mind
Console brands worth investigating include DiGiCo, Yamaha, Studer, Behringer, Soundcraft, Mackie and Allen & Heath.
For the novice sound engineer, it can be pretty intimidating to walk up to a large analog or digital console and try to figure out the routing of audio signals.
It wouldn’t be so bad if the only place the sound had to go was to the main loudspeakers in the room. Occasionally that’s the case, but most of the time, we’re also sending different mixes to monitors for musicians; to lobby and cry room speakers; and to various recordings.
Moreover, we have several options for how we can group and control our signals. Let’s define what Auxes, Groups, VCAs and Matrix mixes are, and then in my next article, I’ll talk about when you’d use each of them.
Often simply abbreviated as auxes, an auxiliary mix is pretty much what it sounds like; another, alternate mix using the same set of input signals that you are working with in the house mix. Each aux mix will have an individual level control on each channel, as well as a master aux mix level. In this way, aux mixes are very much like the faders; turning up the aux level for channel 1 adds more of whatever is in channel 1 to that aux mix.
As an example, let’s say you are using Aux 1 for your worship leader’s monitor, and that their vocal mic is in channel 1. If she wants more of her voice in her monitor, you turn up the Aux 1 send in channel 1, thus raising the level of her voice in her monitor.
What makes aux mixes so cool is that they don’t affect the house mix at all, and you can just as easily lower or eliminate that signal from Aux 2. Thus, each aux mix is another complete mixing layer for your input signals, albeit without individual EQ adjustments for each of those sends.
Most consoles/mixers that we use for live sound will have at least four, and often six auxes. Of course, larger consoles gain more auxes, and it’s not uncommon to see digital consoles with 16, 24 or more aux mixes (many times, in stereo).
Aux sends (the points you send from each channel) can either be pre-fader or post-fader. That simply means that the fader (which controls your house mix) will either have no effect on the aux send (pre-fader) or it will have an effect (post-fader).
Latest ResourceWorship Facilities Magazine, March-April 2018
The March-April 2018 issue of Worship Facilities Magazine offers articles about how to prepare, prevent and respond to church violence, a look into what church management software can do for your church community, and a piece on how a once popular nightclub venue was transitioned to become Shoreline Church's new home.