Budgeting and Maintenance: Making the Most of Your Resources
Physical parts wear down over time, and routine cleaning will extend the life of your gear. Be sure that with every piece of equipment you own, that you have read the manufacturers recommendations and precautions first.
Budgeting and Maintenance NewsBudgeting and Maintenance: Value Stewardship, Wise Use of Resources Doing Video on a Budget: Plan, Research and List Budgeting and Maintenance: Plan For The Long-Term, Avoid Unwanted Surprises Budgeting and Maintenance – Spending Money on Something You Don’t See
Team Management ResourceWorship Facilities Magazine, January-February 2018
The January-February 2018 issue of Worship Facilities Magazine offers articles about the many steps a church had to take in the aftermath of a fire, and another involving a church making the jump to 4K.
Church budgets have very little wiggle room in them, so making the most of what you’re given is critical.
Here are a few steps to take, to make budgeting and maintenance a more natural part of your end-of-year activities. Taking these steps will ensure that the gear you have will last and the equipment you choose to purchase is what you need.
Before you look at planning upgrades, it is worth reading the following articles: one on doing homework for upgrade planning and another on
and planning an upgrade in the coming year, as a means to help in having an inventory of what you have and when you acquired it, which is critical.
The expressions “time flies” and “they don’t make things like they used to” should cause us to pause and carefully examine the gear we’re using.
Having an inventory can be as simple as a spreadsheet with the equipment type, where it is used and when it was acquired. It can also be a robust system where everything is tagged, labeled and scanned in. Both systems will get the job done, but the critical part is to have something in place. This will allow you to quickly see what you have and what you need to think about replacing.
Physical parts wear down over time, and routine cleaning will extend the life of your gear. A can of compressed air may be all that is needed. Be sure that with every piece of equipment you own, that you have read the manufacturers recommendations and precautions first. What worked great on the same type of gear in the past may end up being harmful now.
Another benefit of keeping your equipment clean is that it looks better. Whether we like it or not, people will judge us on the appearance of things in our churches. An inch of dust on a line array may give the impression that you don’t care too much about how things sound, even if it has no impact on the functionality of the equipment.
When you’re using your gear week after week, you will notice when something doesn’t feel right. Maybe it’s a fader that has too much play or a connection that doesn’t snap in the way it used to.
Taking the time to address these things right away can save you time and money down the road. You may also notice when something doesn’t sound right.
Many components have intake and exhaust fans to aid in the cooling of components. These can easily fail, but are relatively inexpensive to replace. Failure to replace these could lead to permanent damage to your equipment and leave you paying hundreds or thousands of dollars more to replace the device.
Latest ResourceFor Lighting Design, What Software Is The Right Match For Your Needs? (Part 3)
Dig into this final part of a three-part series that looks into choices for lighting design software, including Vectorworks and LightConverse, and how each can best serve the needs of your church.