Switching from ARC Source to LED: It’s Not Always A Given

Is it possible to do an entire lighting system with LED? Absolutely. But one should let the vision and the space drive the lighting choices.

Switching from ARC Source to LED: It’s Not Always A Given
Among the very capable fixtures that are not LED-based are the Martin MAC Viper Profile, left, and the Martin MAC Viper Wash.
Switching from ARC Source to LED: It’s Not Always A Given
Among the very capable fixtures that are not LED-based are the Martin MAC Viper Profile, left, and the Martin MAC Viper Wash.

Lighting News

Used Lighting: Account for Mix of Pros, Cons When Deciding To Buy New, Used
Used Lighting: No Need to Break the Bank When Finding Quality Fixtures
DMX Control: In Planning System, Look to IP, Wireless As Options
Lighting Control: What to Know About 3 Protocols

Lighting Resource

Using LED Video Panels as Lighting
VAST Technologies equips massive worship center with 100 Elation Pro Video Series LED displays.

LED. LED. LED. It seems that is all anyone is talking about these days.

Nearly every conversation I now have with ministries regarding lighting, always begins with the question, “Will this be all LED?” My answer always ends up being, “We need to let the space and your vision tell us what the equipment needs are.”

And that’s exactly what you want to do.

For smaller rooms, options for LED versus ARC source fixtures are much larger and more cost effective.

How do you intend to use the space? The space itself will tell us which gear is the right choice.

Is it possible to do an entire lighting system with LED? Absolutely. At E2i Design, we have put together countless systems with 100 percent LED lighting, from house lights to stage lights.

But it isn’t a go-to for us.

Our go-to is to let the vision and the space drive the choices.

Here are some things to be considered when thinking about either switching from ARC source to LED, or when considering your first purchase (none of this should be confused with decisions that are related to incandescent to LED … that’s a different process).

Typically ARC source lamps are found in some form of a moving head profile or wash fixture, just so we’re all on the same page.

1. Size of the space

If we have a smaller room with lower trim heights (say 10 feet to 30 feet), our options for LED versus ARC source fixtures are much larger and more cost effective. Most of this is in part due to where LED lighting technology is at currently. Lower wattage LED diodes are a dime a dozen and can do a very nice job. The fixtures they are found in tend to be lower on the price point and often lower on the available feature set, but nonetheless, get the job done with excellence.

The larger the room and higher the trim height (say 30 feet-plus), the brighter the fixture needs to be. That seems simple enough. However, the available options for a fixture that can handle a room like this with an LED-based lamp source, slim down quite a bit and the price goes up … fast! There are a lot more options on the market for fixtures that are ARC source-lamp based, designed for these larger spaces. While their price points tend to be high as well, they are also feature rich and efficient at their job. Often they are also a nice size. Some LED fixtures for larger rooms are also very large in physical size, in order for the heat management system to be effective, so this is something to consider.

Make sure the fixture fits in the room!

2. Color temperature

ARC source lamps are naturally cold in color temperature. They tend to start around 6,000k and go up from there. This produces a very crisp white that designers love. This color tends to be rather easy for LED diodes to replicate. However, quite often in worship environments, we want the ability to color temp correct (CTC) the coldness of the white into a warmer look, to be used for creating natural skin tones. This is a more difficult process for a fixture to handle as LED, even though it may look the same initially, and doesn’t produce the same light as an ARC source so it can color correct differently.  You will want to check the quality of the warmer corrected light in your environment and on camera, if you are shooting video with the fixtures to make sure it looks good to you.

One thing not related to color, but still very important, is to make sure the fixture has a good lens system that can effectively blend the separate diodes together to create one homogenized beam of light, as if it were coming from a single ARC source lamp.

If the lenses and filters inside of the fixture aren’t good, you will see tiny beams of light that attempt to make up a single look, but don’t actually pull it off. This is important as it can affect the look of your design.

3. Type of Fixture

There are different types of ARC source- and LED-based fixtures on the market. I look at them in the following category:

a. Profile: This type of fixture will have a hard edge to it. It has a gobo wheel or two, a color wheel or two, may or may not have a CMY color mix system and an assortment of other goodies like prisms, framing shutters, zoom control, etc.
b. Wash: The inherent features of a wash fixture will be a soft edge fixture with a very even field of light. Wash fixtures come in a full body or a pancake version. I’ll explain … A full body wash fixture has the same physical body as its profile brother. An example of this would be a Martin MAC Viper Profile and a MAC Viper Wash (neither of them are an LED-based fixture, but they have the same physical attributes from a physical exterior perspective).

More About Josh Holowicki
Josh Holowicki is a passionate Christ follower who has dedicated his energy to helping “The Church” incorporate technology to enhance the worship experience. Josh has a unique background in that he not only holds a B.B.A. from Eastern Michigan University, but has also spent five years on staff as the lighting director and one of two scenic designers at NorthRidge Church in Plymouth, Michigan. Having studied under or worked with some of the most recognized names in both the Christian and secular lighting industry, Josh has fulfilled what he believes is his personal mission and calling by founding E2i Design, an organization whose focus is to Educate, Empower, and Inspire ministries in the area of visual impact on the live worship experience. Josh lives in Michigan with his wife of 12 years, Michelle and their seven pound Yorkshire terrier Buster.
Get in Touch: josh.holowicki@e2idesign.com    More by Josh Holowicki

Latest Resource

Worship Facilities Magazine, January-February 2018
The January-February 2018 issue of Worship Facilities Magazine offers articles about the many steps a church had to take in the aftermath of a fire, and another involving a church making the jump to 4K.

Article Topics

Technology · Lighting · Visual Arts · Lighting Design · Arc Source · Diodes · Filters · Fixtures · House Lights · LED · All Topics

Support and Enhance the Worship Message

The latest strategies for sound, lighting and facilities can help you better attract and engage with your congregation. With Worship Facilities’ insights on leadership, communication and administrative tools, each issue shows you how to design and maintain your facility and how to adapt it to meet the changing needs of today’s members.
Explore the success stories of others, and find ways to enhance your weekly services. Get a free subscription to Worship Facilities magazine.


Editor's Picks
©2018 WFX Network · A division of Informa · 1166 Avenue of the Americas, 10th Floor, New York, NY 10036 · All Rights Reserved.